Oil Burner Spray Nozzle
viewed：336
● Feature:
A kind of high-pressure atomizing oil burner nozzle that suitable for atomizing and burning for light oil, heavy oil.
There are 4 angles for the spraying - 30 degrees, 45 degrees, 60 degrees and 80 degrees.
Three spraying models: full cone (S), semi full cone(B), hollow cone(H).
Atomization of light oil and heavy oil
● NOZZLE SPECIFICATIONS:
Nozzles are provided with unique ribbed sintered bronze filters on sizes up through 1.35 GPH. Larger sizes are equipped with 120 mesh strainers. Large Capacity (LC) nozzles are supplied as “tips only”. All nozzle components are fabricated entirely of a special high chrome, heat resistant grade of stainless steel. Sintered filters are made of bronze and are nominally rated for filtration to 40 microns. Mesh screens are of Type 304 stainless steel on brass support pieces.
● TEST SPECIFICATIONS:
All oil burner nozzles are 100% tested on oil for accuracy of flow rate, spray angle, concentricity and spray quality. This individual testing is your assurance of top quality and consistency. Test Conditions: 35 SSU viscosity oil (2.7 Cstk) @ 100° F.; specific gravity = .825 @ 60°F., test pressure = 100 psi.
● Flow Tolerances:
.30 - .45 GPH = +10%/-0%
.50 - .85 GPH: = +5%/-3%
1.00 - 1.50 GPH = +5%/-2%
1.65 GPH & up =+2.5%/-2.5%
● Spray Angle Tolerances:
30° & 45° =10° /-0°
60°, 70°, 80° & 90° = +5°/-O°
● Rate of InspectIon: 100%
| Standard Flow Rate Increments (Gallons per hour @ 100psi | |||||||
| 0.65 | 1.25 | 2.75 | 5.00 | 9.00 | 16.00 | 26.00 | 60.00 |
| 0.70 | 1.35 | 3.00 | 5.50 | 9.50 | 17.00 | 28.00 | 65.00 |
| 0.75 | 1.50 | 3.25 | 6.00 | 10.00 | 18.00 | 30.00 | 70.00 |
| 0.85 | 1.65 | 3.50 | 6.50 | 11.00 | 19.00 | 35.00 | 75.00 |
| 0.90 | 1.75 | 3.75 | 7.00 | 12.00 | 20.00 | 40.00 | 80.00 |
| 1.00 | 2.00 | 4.00 | 7.50 | 13.00 | 22.00 | 45.00 | 90.00 |
| 1.10 | 2.25 | 4.25 | 8.00 | 14.00 | 24.00 | 50.00 | 100.00 |
| 1.20 | 2.50 | 4.50 | 8.50 | 15.00 | 25.00 | 55.00 | 120.00 |
